Omega Yard 300
It will do whatever it takes.
This ultra-robust welding machine is the ideal tool for welders who work in the most demanding environments. It could be offshore or in shipyards and on construction sites. It is designed for heavy-duty usage, and is perfect to bring along where no other welding machine can keep up.
Show price
| Currency | Price (tax-exclusive) |
| EUR (€) | 3.430 |
| DKK | 25.560 |
| GBP (£) | 2.975 |
| NOK | 37.600 |
| SEK | 37.510 |
| CZK (Kč) | 81.000 |
| HUF | 1.297.500 |
Process
MIG/MAG (GMAW)
Current range
15-300 A
Duty cycle 60%/40°C
240 A/26 V
Mains voltage
3 × 400 V
Weight
17 kg
Dimensions HWL
455 × 222 × 638 mm
Protection class
IP 23S
Standards
EN/IEC60974 -1. – 5. -10.
Basically extremely durable
High duty cycle.
It just keeps on welding.
The high duty cycle of the machine makes you able to weld for many hours in extreme environments. You will get tired long before the machine does, and you will not experience any decrease of currents. A perfect machine for heavy-duty usage.
Extremely robust.
Just be rough on it.
Expose Omega Yard to a little of everything – it won’t mind. Thanks to the robust cabinet and highly insulated electronic compartments, it is resistant to impact, dust and moisture. Bring it along for on-site welding operation in both open and narrow spaces.
Keep your focus.
Simpel manual adjustment.
The simple manual control panel allows you to make accurate adjustments of welding parameters. The large buttons allows you to keep your gloves on while fine tuning your settings.
Reversed polarity.
Don’t worry about gas cylinders.
Take advantage of reversed polarity to use innershield wire or electrodes (MMA). Go to places but leave your gas cylinders at home.
“I have never seen anything like it”
“When we tested the machine, we were able to weld for 55 minutes using approx. 300 amps, which is 100% duty cycle, without any changes in the weld pool . What stopped the welding operation was in fact that the wire coil ran empty. I have never seen anything like it with compact welding machines”.
Oddvar Schei
Welder & planner, Kvaerner Stord, Norway
Specifications
Quick overview
Design
Portable
17 kg.
Migatronic welding functions*
Simplify otherwise complicated welds
Processes
MIG/MAG
MMA
Control panel
Manual control
*Not included – must be purchased separately.
Features
Software updates via SD-card
Get your software updates from migatronic.com/support and transfer them to your machine via SD-card.
LED light in wire console
Easily change wire and spools in low light environments and the darkest workshops.
Reversed polarity
Weld outside using electrodes (MMA) or innershield wire (MIG/MAG) with optimum gas protection.
Arc Adjust
Adjust the machine’s reaction time to short-circuits. Arc Adjust is an electronic choke or inductance/reactance.
Migatronic welding functions
Intelligent Gas Control*
IGC® Intelligent Gas Control technology prevents over-consumption of gas and gives you long term savings. With weld pools always perfectly protected, you increase the quality of each weld. Make sure that all your welding machines are equipped with IGC® Intelligent Gas Control and save money every day. Your investment will quickly pay for itself.
*Not included – Option available doing purchase.
Torch
ML 360 Twist, 4 meters
Included
Large flexibility, easy to use. Turn the swan neck 90° in both directions and be able to use the correct working posture in all welding angles.
Included w/ configuration
- Basic panel
- ML360 Twist 1.2, 4 meters
- Earth cable, 5 meters
- 16 A mains plug
- Wire rolls 1.2 mm, V-groove
- MMA dinse for easy switch-over from MIG to MMA welding
- LED light in wire feeder
- Voltage stabilising kit for generator use/variations in mains supply
- Calibration certificate
- Up to 5 years extended warranty (with registration)
- Basic panel
- ML360 Twist 1.2, 4 meters
- Earth cable, 5 meters
- 16 A mains plug
- Wire rolls 1.2 mm
- MMA dinse for easy switch-over from MIG to MMA welding
- LED light in wire feeder
- Voltage stabilising kit for generator use/variations in mains supply
- Calibration certificate
- Up to 5 years extended warranty (with registration)
Warranty
Up to 5 years with registration
Register your newly purchased welding machine on migatronic.com/warranty no later than 30 days from the date of purchase. Then you get up to 3- or 5-years’ warranty on selected components.
Technical specifications
| Current range | 15-300 A |
| Mains voltage +/÷ 15% (50-60Hz) | 3 X 400 V |
| Fuse type C | 16 A |
| Duty cycle 100% /20°C (MIG) | 300 A/29 V |
| Duty cycle max. /20°C (MIG) | 300 A/29 V |
| Duty cycle 100% /40°C (MIG) | 220 A/25 V |
| Duty cycle 60% /40°C (MIG) | 240 A/26 V |
| Duty cycle max. /40°C (MIG) | 300 A/25%/29 V |
| Open circuit voltage | 50-55 V |
| Protection class | IP 23S |
| Application class | S/CE |
| Standards | EN/IEC60974 -1. - 5. -10. |
| Dimensions (H x W x L) | 455 x 222 x 638 mm |
| Weight | 17 kg |